Leakage current can be measured by any one of three methods. A battery-operated AC milliammeter. The Data Precision digital multimeter is suitable for this job. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. See Fig. The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc.
During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick- up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. To Exposed Metal Parts on Set.
AC voltmeter 0. Refer servicing to qualified personnel only. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. Owner's Record The model and serial numbers are located at the rear of the unit.
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance. Thank you for purchasing the Sony Compact Disc Player. Before operating the unit, please read this manual thoroughly and retain it for future reference.
You can also use the controls on the remote if they have the same or similar names as those on the player. Indicates hints and tips for making the task easier. Getting Started Unpacking When using the remote, point it at the remote sensor g on the player. Be sure to turn off the power of each component before making the connections. When the remote no longer operates the player, replace all the batteries with new ones.
Doing so may cause a malfunction. Getting Started. Getting Started Getting Started 5 Hookups When connecting an audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red right to Red and White left to White.
Be sure to make connections firmly to avoid hum and noise. When you reduce the output level, "ATT. When you turn off the player, the output level automatically returns to the maximum level. Take off the cap and plug in the optical cable. Note that you cannot use fading in or out page 15 and Time Fade page 15 functions when making this connection. Transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms back to their original position.
If not, set the selector to the correct position using a screwdriver before connecting the AC power cord to a wall outlet. For the customers in the United States. This equipment has been tested and. Class B digital device, pursuant to Part. These limits are. However, there is no guarantee that. If this equipment does cause. You are cautioned that any changes or.
The model and serial numbers are. Record the serial number in the space. Refer to them whenever. This symbol is intended to alert. Thank you for purchasing the Sony.
0コメント